for asphalt pavements: pavement temperature and
load frequency estimation”, Austroads Project No.
TT1826, Technical Report, AP-T248-13 September
2013, Australia.
- AASHTO (1993) “AASHTO guide for design of
pavement structure”, American Association of State
Highway and Transportation Official, USA.
- AASHTO (2012) “prediction of asphalt-bound
pavement layer temperatures”, American Association
of State Highway and Transportation Official,
AASHTO T317, USA.
- ASTM (2012) “ASTM D7228: standard test method
for prediction of asphalt-bound pavement layer temperatures”,
American Society For Testing and Materials,
USA.
- Bazi, G. (2010) “Evaluation of layer moduli and
overlay design software”, Elmod6 Training Manual,
Dynatest.
- Ding, K. (2005) “Effects of mix design factors on
thermal behavior of hot mix asphalt”, the University
of New Brunswick.
- Emmanuel, G. Fernando, Wenting L. and Duchwan
R. (2001) “Development of a procedure for temperature
correction of backcalculated ac modulus”, Texas
Department of Transportation Research and Technology
Implementation Office, FHWA/TX-02/1863-1.
- Everitt, P. R. (2001) “Prediction of asphalt pavement
temperatures in south Africa”, 20th South African
Transport Conference, University of Natal, Durban,
pp. 16 – 20.
- Inge, E. H. and Kim, Y. R. (2013) "Prediction of effective
asphaltic layer temperature", Transportation
Research Record, No. 1473, Transportation Research
Board, National Research Council, Washington,
D.C., 1995, pp. 93-100. HD 29/08, Volume 7, Section
3, Part 2, data for pavement assessment, design
manual for roads and bridges, highway agency, UK
government.
- Korczak, R. and Tighe, S. (2012) “Use of an automated
temperature data logger (ATDL) during falling
weight deflectometer (FWD) testing”, Conference of
Transportation Association of Canada Fredericton,
Advances in Pavement Evaluation and Instrumentation
Session, New Brunswick.
- Lukanen, E. and Stubstad, R. (2000) “Temperature
predictions and adjustment factors for asphalt pavement”,
Office of Infrastructure Research And Development
Federal Highway Administration, FHWARD-
98-085.
- Petersen, C. and Mahura, A. (2012) “Influence of the
pavement type on the road surface temperature”, Danish
Meteorological Institute, Copenhagen, Denmark.
- Stubstad, R. N., Baltzer, S., Lukanen, E. O. and Ertman-
Larsen, H .J. (1994) “Prediction of ac mat temperatures
for routine load/deflection measurements.
Proc.”, 4th International Conference on the Bearing
Capacity of Roads and Airfields, Vol. 1, Minneapolis,
Minn.
- Vasenev, A., Hartmann, T. and Doree, A. (2012)
“Prediction of the in-asphalt temperature for road
construction operations” Computing in Civil Engineering
(2012): pp. 469-476.
- Yavuzturk C. and Ksaibati, K (2002) “Assessment
of temperature fluctuations in asphalt pavements due
to thermal environmental conditions using a twodimensional,
transient finite difference approach”,
Department of Civil and Architectural Engineering,
University of Wyoming.