- زیاری، حسن (1380) "راهنمای کاربردی آزمایشگاه قیر و آسفالت"، انتشارات دانشگاه علم و صنعت ایران.
-
Anjan kumar, S. and
Veeraragavan, A. (2011) “Dynamic mechanical characterization of asphalt concrete mixes with modified asphalt binders”. Materials Science and Engineering, Vol. 528:21, pp. 6445-6454
-Ghile, D. B. (2006) “Effects of nano clay modification on rheology of bitumen and on performance of asphalt mixtures”, M.Sc. thesis, Delft University of Technology, Delft, Netherlands
-
Hussain, F., Hojjati, M., Okamoto, M. and Gorga, R. (2006) “Review article: polymer–matrix nanocomposites, processing, manufacturing, and application” J. Compos Mater, Vol.40 (17), pp. 1511–75.
-Khattak, M. J., Khattab A., Rizvi H. and Zhang, P.(2012) “The impact of carbon nano-fiber modification on asphalt binder rheology”,Construction and Building Materials, Vol. 30, pp.257–264.
-Khodaii, A. and Mehrara, A. (2009) “Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test”, Construction and Building Materials, Vol. 23, pp.2586–2592.
-
Kommidi Santosh Reddy,
S. Umakanthan, J. and
Krishnan, M. (2012) “Constant strain rate experiments and constitutive modeling for a class of bitumen’. Mechanics of Time- Dependent Materials Vol.16:3, pp. 251-274
Radziszewski, P., Ziolkowski, R. and Cygas, D. (2003) “Technological aging influence on viscosity of selected bitumen”, Journal of Civil Engendering and Management. Vol. IX. No I, pp.20-24.
-Sengoz, B. and Isikyakar, G. (2007) “Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen”. Construction Building Materials, Vol. 22, pp.1897–905.
-www.nano.ir
-Sadeghpour Galooyak, S. and Dabir, B. (2010) “Rheological properties and storage stability of bitumen/SBS/montmorillonite Composites”, Construction and Building Materials vol. 24, pp. 300–307
-Zhanping, Y. (2011( “Nanoclay-modified asphalt materials: preparation and characterization”, J of Construction & Building Materials, No. 25, pp.1072-1078.
-Ziari, H., Rahim-of, K., Fazilati, M., Goli A. and Farahani, H. (2012) “Evaluation of different conditions on the mixing bitumen and carbon nano-tubes”, International Journal of Civil & Environmental Engineering, Vol. 12 (6), pp. 53-59.