-سازمان مدیریت و برنامه ریزی (1390) " آیین نامه روسازی راه ایران" نشریه شماره 234، تجدید نظر اول، سازمان مدیریت و برنامه ریزی کشور، موسسه قیرو آسفالت ایران، پژوهشکده حمل ونقل.
-سازمان مدیریت و برنامه ریزی (1395) ˮ دستور العمل طراحی و اجرای مخلوط های آسفالتی درشت دانه “ ضابطه شماره 706، سازمان مدیریت و برنامه ریزی کشور، پژوهشکده حمل ونقل.
-باباگلی، رضوان (1395)ˮبررسی آزمایشگاهی تأثیر پودر معدنی گلیسونات بر خصوصیات عملکردی مخلوط آسفالتی با استخوان بندی سنگدانه ای“ فصلنامه مهندسی حمل و نقل، دوره هشتم، شماره 1، ص. 1-12.
-محمدزاده مقدم، ابوالفضل (1389)ˮ بررسی تأثیر انواع الیاف تثبیت کننده بر خواص خستگی مخلوط های آسفالتی با استخوان بندی سنگدانه ای“، پژوهشنامه حمل و نقل، سال هفتم، شماره 3، ص. 275-289.
-Abtahi1, S. M., Esfandiarpour, S., Kunt, M., Hejazi, S. M. and Ebrahimi, M.G. (2013) “Hybrid reinforcementof asphalt-concrete mixtures using glass and polypropylene fibers”, Journal of Engineered Fibers and Fabrics, Vol. 8, Issue 2, pp.25-35.
-ASTM D6927 (2006) “Standard Test Method for Marshall Stability and Flow of Bituminous Mixturesˮ, USA: American Society for Testing and Materials.
-ASTM C136 (2001) “Standard Test Method for Sieve Analysis of Fine and Coarse Aggregatesˮ. USA: American Society for Testing and Materials.
-ASTM C131, M-14 (2003) “Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machineˮ, USA: American Society for Testing and Materials.
-ASTM C127 - 04 (2004) “Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregateˮ, USA: American Society for Testing and Materials.
-ASTM D4791 (2005) “Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregateˮ, USA: American Society for Testing and Materials.
-ASTM D 113 - 99 (1999) “Standard Test Method for Ductility of Bituminous Materialsˮ, USA: American Society for Testing and Materials.
-ASTM D5 – 05a (2005) “Standard Test Method for Penetration of Bituminous Materialsˮ, USA: American Society for Testing and Materials.
-ASTM D92 – 05 (2002) “Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester ˮ, USA: American Society for Testing and Materials.
-ASTM D36 – 95 (1995) “Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)ˮ, USA: American Society for Testing and Materials.
-ASTM D70 – 03, (2003) “Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)ˮ . USA: American Society for Testing and Materials.
-ASTM D70 – 03 (2003) “Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)ˮ . USA: American Society for Testing and Materials.
-Chemist, Ch. (2005) “Polymer-modified hot mix asphalt design”, Construction and Materials Illinois Department of Transportation.
-Çubuk, K. M. (2004) “Effects of diatomite on physical properties of asphalt cement and stability and modulus of elasticity of hot-mix bituminous laboratory specimens”, 3rd Euroaphalt & Eurobitume Congress Vienna , Paper 181.
-Goutham, S., Lekha, B.M., Krishna, G. and Ravi Shankar, A.U. (2016) “Comparison of Stone Matrix Asphalt mixtures with polymer-modified bitumen and shredded waste plasticsˮ, Journal of Road Materials and pavement Design vol. 17, Issue 4, pp.. 933-945.
-Jones, G. M. (1997) “The Effect of Hydrated Lime on Asphalt in Bituminous Pavements”, NLA Meeting, Utah DOT.
-Little, D. N. (1994) ”Laboratory testing asphalt mixture incorporating crushed river gravel stockpile treated with lime slurry” , prepared for Chemical Lime Corporation, TexasTrans portation Institute.
- Liu, G., Nielsen, E., Komacka, J., Greet, L., van de Ven, M. (2014) “Rheological and chemical evaluation on the ageing properties of SBS polymer modified bitumen: From the laboratory to the fieldˮ ,Construction and Building Materials Vol. 51, pp. 244–248.
-Majidzadeh, K. and Stadler, R. R. (1969) “Effect of water on behavior of sand-asphalt mixtures under repeated loading”, Highway Research Rec. No. 273.
-Mokhtari, A. (2012) “Mechanistic approach for fiber and polymer modified SMA mixtures”, Construction and Building Materials, No. 36 , pp. 381–390.
- Manosalvas-Paredes, M. Gallego, J. Saiz, L. and Jose, M. (2016) “Rubber modified binders as an alternative to cellulose fiber – SBS polymers in stone matrix asphalt”, Construction and Building Materials, Volume 121, pp. 727–732.
- Lavasani, M., Latifi Namin, M. and Fartash, H. (2015) “Experimental investigation on mineral and organic fibers effect on resilient modulus and dynamic creep of stone matrix asphalt and continuous graded mixtures in three temperature levels”, Construction and Building Materials, Volume 95, pp. 232–242.
-Ratnasamy, M., Nor Azurah, B., Salihudin, H. and Danial, M. (2014) “Laboratory fatigue evaluation of modified and unmodified asphalt binders in Stone Mastic Asphalt mixtures using a newly developed crack meander technique” , International Journal of Fatigue, Volume 59, pp. 1–8.
-Shenghua Wu, S. M. and Wen, H. (2017) “Evaluation of long-term performance of stone matrix asphalt in Washington Stateˮ, Journal of Performance of Constructed Facilities, Vol. 31, Issue 1, pp. 741-748.
-Singh, M., Kumara, P. and Maurya, M. R. (2013) “Strength characteristics of SBS modified asphalt mixes with various aggregates”, Construction and Building Materials 41, pp. 815–823.
-Technical Regulations for Roads, Turkey (2013) pp. 314-408.
-Vlachovicova, Z., Wekumbura, Ch., Stastna, J. and Zanzotto, L. (2007) “ Creep characteristics of asphalt modified by radialstyrene–butadiene–styrene copolymer”, Construction and Building Materials, No. 21, pp. 567–577.
-Vural Kok, B. and Yilmaz, M. (2009) “The effect of using lime and styrene- butadiene- styrene on moisture sensivity resistance of hot mix asphalt”, Construction and Building Materials, No. 23, pp. 1999–2006
- Buttlar, William G. and Brain, C. (2017) Performance space diagram for the evaluation of high- and low-temperature asphalt mixture performance” Road Materials and Pavement Design, Volume 18, pp. 336–358.