-فخری، م. و فرخی، م. (1389)، "بررسی نحوه گسترش ترک های بالا به پایین در روسازی های آسفالتی با فرضیه مکانیک شکست"، مجله علمی پژوهشی عمران مدرس ، پاییز1389.
- مقدس نژاد، ف. (1386) ،"کاربرد ژئوسنتتیکها در روسازی آسفالتی جهت کنترل ترکهای انعکاسی" ، پژوهشکده حمل و نقل، وزارت راه و شهرسازی.
-Abdel-Motaleb, M.E., (2007) “Impact of high-pressure truck tires on pavement design in Egypt”, Emirates Journal for Engineering Research, Vol. 12, No. 2, pp. 65-73.
-Anderson, B. (2005) "Fracture mechanics: fundamentals and applications”, CRC, London, UK.
-Beena Sukumaran, B. (2004) “Three dimensional finite element modeling of flexible pavement”, FAA Worldwide Airport Technology Transfer Conference Atlantic City, New Jersey, USA
-Chen, H. H., Marshek, K. M. and Saraf, C. L. (1990) “Effects of truck tire contact pressure distribution on the design of flexible pavements: a three dimensional finite element approach”, Transportation Research Record, No. 1095, pp.7278
-Dave, E. V., Song, S. H., Buttlar, W. G. and Paulino, G. H. (2007) “Reflective and thermal cracking modeling of asphalt concrete overlays” Proc., Advance Characterization of Pavement and Soil Engineering Materials, pp. 1241-1252.
-Fan, Z. (2011) “Load and temperature on the asphalt pavement top-down cracking of finite element analysis”. Ph.d Thesis, Changsha University of Science and Technology, China.
Florida Department of Transportation. Research Center (2002) “Implementation of SHRP indirect tension tester to mitigate cracking in asphalt pavements and overlays”, Reynaldo Roque.
-Hui, L.,Hong-ping Z., Yu M. and Chuan-yao, C. (2010) “Simulation of top-down crack propagation in asphalt pavements”, Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) vol. 3, pp.52-63.
-Huang, Y. (2004) “Pavement analysis and design”, Prentice Hall, New York, USA.
-Liao, G. and Huang, X. (2008) “Application of ABAQUS finite element software in road engineering”, Southeast University Press, Nanjing.
-Muhammad N. S. and Bodhinayake, B. C. (2003) “Non-Linear finite element analysis of flexible pavements”, Advances in Engineering Software 34, pp. 657-662.
-Paris, P. and Erdogan, F. (1963) “A critical analysis of crack propagation laws”, Journal of Basic Engineering, Transactions of the American Society of Mechanical Engineers, December, pp. 528-53
-Rahman M. T. , Mahmud K. and Ahsan S. (2011) “Stress strain characteristics of flexible pavement using Finite Element Analysis” International Journal of Civil and Structural Engineering, Volume 2, No 1, pp. 352-364.
- Seong, H. S., Glaucio, H. P. and William, G. B. (2006) “Simulation of crack propagation in asphalt concrete using an intrinsic cohesive zone model”, Journal of Engineering Mechanics © ASCE / November 2006.
-Sun, L. and Duan, Y. (2013) “Dynamic response of top-down cracked asphalt concrete pavement under a half-sinusoidal impact load” , Springer-Verlag Wien vol. 2, pp.16-25.
-Sun, L. and Hudson, W.R. (2005) “Probabilistic approaches for pavement fatigue cracking prediction based on cumulative damage using Miner’s law” J. Eng. Mech. ASCE 131, 546–549.
-Xinjun, L. and Marasteanu, M. (2010) “The fracture process zone in asphalt mixture at low temperature” Engineering Fracture Mechanics, vol. 77, no. 7, pp. 1175-1190.
-Yanjing, Z., Fujian, N. and Lan, Z. (2011) “Viscoelastic response of reflective cracking under dynamic vehicle loading in asphalt concrete pavements”, ASCE, (5), pp.1021-1033.
- Zheng, C. and Xie, S. (2003). “Effects of the tire-pavement contact pressure on asphalt pavement”. Proceedings of the eastern asia society for transportation studies, (4), 401-407.