- Airey, G. D. (2002) "Rheological evaluation of ethylene vinyl acetate polymer modified bitumens", Constr. Build. Mater. No. 16, pp. 473–487.
- Airey, G. D. (2004) "Styrene-butadiene-styrene polymer modification of road bitumens", J. Mater. Sci. No. 39, pp. 951–959.
- Amin, H. B. Hussein, I. A. , Iqbal, M. H. and Al-Abdul Wahhab, H. I. (2006) "Rheological investigation of the influence of acrylate polymers on the modification of asphalt", J. Appl. Polym. Sci. No. 102, pp. 3446–3456.
- Barzegari, Mohammad Reza, Yousefi, Ali Akbar and Zeynali, Mohammad Ebrahim (2003) "Bitumen modification via PS/PB Blend", Iranian Journal of Polymer Science and Technology. No. 16, pp. 303- 311.
- Becker, Y. Müller, A.J. and Rodríguez, Y. (2003) "Use of rheological compatibility criteria to study SBS modified asphalts" J. Appl. Polym. Sci. No. 90, pp. 1772–1782.
- Biondi, D. Polacco, G. Stastna, J. Vlachovicova, Z. and Zanzotto, L. (2004) "Rheology of asphalts modified with glycidylmethacrylate functionalized polymers", J. Polym. Eng. Sci, No. 44, pp. 2185–2193.
- Birgisson, Bjorn. Kringos, Niki. and Zhu, Jiqing. (2014) "Polymer modification of bitumen: Advances and challenges". European Polymer Journal. No. 54, pp. 18–38.
- Carrera, V. Cuadri, A.A. García-Morales, M. and Partal, P. (2014) "Influence of the prepolymer molec ular weight and free isocyanate content on the rheology of polyurethane modified bitumens". European Polymer Journal. No. 57, pp. 151–159.
- Carrera, V., Gallegos, C., García-Morales, M., Partal, P. and Pérez-Lepe, A. (2010) "Effect of processing on the rheological properties of poly-urethane/ urea bituminous products", Fuel Processing Technology. No. 91, pp. 1139–1145.
- Cuadri, A. A. García-Morales, M. Navarro, F.J. and Partal, P. (2014) "Processing of bitumens modified by a bio-oil-derived polyurethane", Fuel. No. 118. pp. 83–90.
- Fawcett, A. H. and McNally, T. (2001) "Blends of bitumen with polymers having a styrene component", Polym. Eng. Sci. No. 41, pp. 1251–1264.
- Gallegos, C. García-Morales, M. Navarro, F. J. and Partal, P. (2006) "Effect of waste polymer addition on the rheology of modified bitumen", Fuel. No. 85, pp. 936–43.
- Izquierdo, M. A. Navarro, F. J. Martinez-Boza, F.J. and Gallegos, C. (2012) "Bituminous polyurethane foams for building applications: Influence of bitumen hardness", Construction and Building Materials, No. 30, pp. 706–713.
- Gallegos, C. Navarro, F. J. García-Morales, M. Martínez-Boza, F. J. and Partal, P. (2007) "Bitumen modification with a low-molecular-weight reactive isocyanate-terminated polymer", Fuel, No. 86, pp. 2291–2299.
- Gallegos, C., Izquierdo, M.A., Navarro, F.J. and Martinez-Boza, F. (2013) "Effects of MDI–PPG molecular weight on the thermorheological behaviour of MDI–isocyanate based bituminous foams", Journal of Industrial and Engineering Chemistry. No. 19, pp. 704–711.
- García-Morales, M. Partal, P. Navarro, F. J. Martinez- Boza, F. J. Gallegos, C. González, N. González, O. and Muñozb, M. E. (2004) "Viscous properties and microstructure of recycled EVA modified bitumen", Fuel. No. 83, pp. 31–38.
- Izquierdo, M. A. García-Morales, M., Martínez-Boza, F. J. and Navarro, F. J. (2014) "Thermo-mechanical properties and microstructural considerations of MDI isocyanate-based bituminous foams", Materials Chemistry and Physics. No. 146. pp. 261–268.
- Lesueur, D. (2009) "The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification", advanced colloid interface science. Sci., No. 145, pp. 42–82.
- Newman, J. K. (1998) "Dynamic shear rheological properties of polymer modified asphalts binder", J. Elastom. Plast. No. 30, pp. 245–263.
- Standard test method for penetration of bituminous materials. Annual Book of ASTM Standards, American Society for Testing and Materials, D 5.
- Standard test method for softening point of bitumen (ring and ball apparatus). Annual Book of ASTM Standard. American Society for Testing and Materials, D 36.
- Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test), Annual Book of ASTM Standard. (1997) "American Society for Testing and Materials", D 2872.
- Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV), Annual Book of ASTM Standard. (2003) "American Society for Testing and Materials", D 6521.
- Whiteoak, D. and Read, J. M. (2003) "The Shell bitumen handbook", London: Thomas Telford Services Ltd.
- Yousefi, A. A. (2003) "Polyethylene dispersions in bitumen: the effects of the polymer structural parameters". J. Appl. Polym. Sci. No. 90, pp. 3183–3190.
- Bahia, H.U., Hanson, D. H, Zeng, M., Zhai, H., Katri, M. A and Anderson, R .M. (2001) "Characterization of modified asphalt binders in superpave mix design”, "NCHRP Report 459, National Academy Press, Washington, D.C.
- Lu, X. and Isacsson, U. (1997) "Rheological characterization of styrene-butadiene-styrene copolymer modified bitumens", Construction Building and Materials. Vol.11, No. 1, pp. 23-32.
- Lu, X., Isacsson, U. and Ekblad, J. (1998) "Lowtemperature properties of styrene-butadiene-styrene polymer modified bitumens". Construction Building and Materials. Vol. 12, pp. 405-414.
- Ameri, M. Mansourian, M. Salehi Ashnai, S. and Yadollahi, G. (2011) "Technical study on the Iranian Gilsonite as an additive for modification of asphalt binders used in pavement construction", Construction Building and Materials. Vol.25,pp. 1379-1387.
- Yao, H., You, Zh., Li, L., Shi, X., Goh, Sh., Mills Beale, J. and Wingard, D. (2012) "Performance of asphalt binder blended with non-modified and polymer- modified nanoclay". Construction Building and Materials. Vol.35, pp. 159-170.
- Ameri, M. Mansourian, A. and Sheikhmotevali, A. H. (2012) "Investigating effects of ethylene vinyl acetate and gilsonite modifiers upon performance of base bitumen using Superpave tests methodology", Construction Building and Materials. Vol.36, pp. 1001-1007.
- WWW.Coimgroup.Com (2014) "Technical Data Sheet of Coim Company, LRP6518".