- Mallick, R. B., Kandhal, P. S., Brown, E. R., Bradbury, R. L. and Kearney, E. J. (2002) “Development of a rational and practical mix design system for Full Depth Reclamation (FDR)” In: Proceedings of the annual meeting of Asphalt Paving Technologists.
- Martínez-Echevarría, M. J., José, M., Recasens, R. M., Gámez, M. C. R. and Ondina, A. M. (2012) “Inlaboratory compaction procedure for cold recycled mixes with bituminous emulsions”, Construction and Building Materials, vol. 36, November, pp. 918–924.
- Michael, S. S., Chadbourn, B .A. and Andrew, D. (2002) “Investigation of recycled asphalt pavement (rap) mixtures”, Final report No. MN/RC – 2002-15, Office of Research Services, Minnesota Department of Transportation, Minnesota, USA.
- Niazi, Y. and Jalili, M. (2009) “Effect of Portland cement and lime additives on properties of cold inplace recycled mixtures with asphalt emulsion”, Construction and Building Materials, vol. 23, No. 3, March, pp. 1338–1343.
- Paoli, L., Guttová, A., Grassi, A., Lackovičová, A., Senko, D. and Loppi, S. (2014) “Biological effects of airborne pollutants released during cement production assessed with lichens (SW Slovakia)”, Ecological Indicators, vol. 40, May, pp. 127–135.
- Papavasiliou, V. and Loizos, A. (2013) “Field performance and fatigue characteristics of recycled pavement materials treated with foamed asphalt”, Construction and Building Materials, vol. 48, November, pp. 677–684.
- Pérez, I., Medina, L. and Ángel, M. (2013) “Mechanical properties and behaviour of in situ materials which are stabilised with bitumen emulsion”, Road Materials and Pavement Design, vol. 14 no. 2, Decamber,pp.221–238.
- Ribeiro, J., Silva, T., Mendonca Filho, J. G. and Flores, D. (2012) “Polycyclic aromatic hydrocarbons (PAHs) in burning and non-burning coal waste piles” Journal of hazardous materials, vol. 199–200, January, pp. 105–110.
- Santos, C. R., Filho, J. R. A., Tubino, R. M. C. and Schneider, I. A. H. (2013) “Use of coal waste as fine aggregates in concrete paving blocks”, Geomaterials, vol. 3, No. 2, April, pp. 54–59.
- Shahhoseiny, M., Doulati Ardejani, F., Shafaei, S. Z., Noaparast, M. and Hamidi, D. (2013) “Geochemical and mineralogical characterization of a pyritic waste pile at the Anjir Tangeh coal washing plant, Zirab, Northern Iran”, Mine Water Environ, vol. 32, No. 2, March, pp. 84–96.
- Suleiman, N., (2002) “A state-of-the-art review of cold in-place recycling of asphalt pavements in the northern plains region”, Final Report, Research Sponsored by North Dakota Department of Transportation, University of North Dakota, Grand Forks, ND, USA.
- Szczepanska, J. and Twardowska, I. (1999) “Distribution and environmental impact of coal-mining wastes in Upper Silesia, Poland”, Environmental Geology, vol. 38, No. 3, September, pp. 249–258.
- Wirtgen, (2012) “Wirtgen cold recycling technology”, Germany, Windhagen: Wirtgen GmbH.
- Xiangguo, L. I., Xiaobo, Y. I. N., Baoguo, M. A., Jian, H. and Junxiao, L. I. (2013) “Cement-fly ash stabilization of cold in-place recycled (CIR) asphalt pavement mixtures for road bases or subbases”, Journal of Wuhan University of Technology-Mater. vol. 28, No. 2, April, pp. 298–302.
- Xiao, J. and Yu, Y. (2011) “Research on moisture susceptibility of emulsion treated cold reclaimed asphalt mixture” ASCE, Pavements and Materials, Geotechnical Special Publication No. 212, pp.45–52.
- Zhang, H., Yu, J. and S. Wu. (2012) “Effect of montmorillonite organic modification on ultraviolet aging properties of SBS modified bitumen”, Construction and Building Materials, vol. 27, No. 1, February, pp. 553–559.
- Zhengfu, B., Hilary, I., John, D., Frank, O. and Sue, S. (2010) “Environmental issues from coal mining and their solutions”, Mining Science and Technology (China), vol. 20, no. 2, March, pp. 215–223.