- شفابخش، غلامعلی، رضائیان، محمدرضا (1389) " بررسی تاثیر درصد و نوع افزودنی ها بر پارامترهای مقاومتی مخلوز های بازیافت سرد با کف قیر"، پژوهشنامه حمل و نقل, شماره دوم، ص53-66.
- عامری، محمود، امیریهرمزکی، مهدی و وامق، مصطفی، خیبری، محمد مهدی (1398) "ارزیابی عملکرد مخلوط های آسفالتی گرم (WMA) با مواد افزودنی های گرم آلی و شیمیایی"، فصلنامه مهندسی حمل و نقل دوره دهم، شماره 4 ص 987-1002.
- نامآورجهرمی، محمد، ابوطالبیاصفهانی، محسن (1397) " بررسی آزمایشگاهی الیاف پارافیبر"، دهمین همایش ملی و نمایشگاه قیر، آسفالت و ماشین آلات، 22 آبان 1397.
- نامآورجهرمی، محمد، سیسختی، سعید و قزلبیگلو، امیر (1396) "بررسی عملکرد الیاف پلی اتیلن و پارافیبر در مخلوط آسفالتی با آزمایش خزش دینامیکی"، دومین همایش ملی مهندسی عمران و توسعه پایدار، دانشگاه استهبان، 10 اسفند 1396.
- نامآورجهرمی، محمد، میریان، وحید، دادیار، محمد و ذوالقدریجهرمی، علیرضا (1397) "بررسی عملکرد الیاف پارافیبر و پلی اتیلن در مخلوط آسفالتی با آزمایش شیارافتادگی"، دومین کنفرانس ملی مهندسی عمران، معماری با تاکید بر اشتغالزایی در صنعت ساختمان، تهران، 13 تیر 1397.
- Akisetty, C., Xiao, F., Gandhi, T., and Amirkhanian, S. (2011) "Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive". Construction and Building Materials., Vol 25, No. 2, PP. 950-956.
- Behroozikhah, A., Morafa, S. H., and Aflaki, S. (2017) "Investigation of fatigue cracks on RAP mixtures containing Sasobit and crumb rubber based on fracture energy". Construction and Building Materials., No. 141, PP. 526-532.
- Brown, D. R., Jared, D., Jones, C., and Watson, D. (1997) "Georgia’s Experience With Crumb Rubber in Hot-Mix Asphalt. Transportation Research Record". the Transportation Research Board., Vol 1583, No. 1, PP. 85-51.
- Fontes, L. P. T. L., Pereira, P. A. A., Trichês, G., Pais, J. C., and Luzia, R. (2008) "Laboratory optimization of continuous blend asphalt rubber". Retrieved from.
- Gopal, V. T., Sebaaly, P. E., and Epps, J. (2002) "Effect of Crumb Rubber Particle Size and Content On The Low Temperature Rheological Properties of Binders". Retrieved from., Vol 99, No. 100, PP. 955-959.
- Hasan-Nattaj, F. and Materials, M. N.-. (2017) "The effect of forta-ferro and steel fibers on mechanical properties of high-strength concrete with and without silica fume and nano-silica". Construction and Building., Retrieved from. Vol. 137, pp. 552-572.
- Huang, Y., Bird, R. N. and Heidrich, O. (2007) "A review of the use of recycled solid waste materials in asphalt pavements". Resources, Conservation and Recycling., Vol 52, No. 1, pp. 58-73.
- Kumar, P., Mehndiratta, H. C., and Immadi, S. (2009) "Investigation of Fiber-Modified Bituminous Mixes. Transportation Research Record". the Transportation Research Board., Vol 2126, No. 1, PP. 91-99.
- Kumar, P., Mehndiratta, H. C., and Singh, K. L. (2010) "Comparative Study of Rheological Behavior of Modified Binders for High-Temperature Areas". Materials in Civil Engineering., Vol 22, No. 10, PP. 978-984.
- Lee, S. J., Akisetty, C. K., and Amirkhanian, S. N. (2008) "The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements". Construction and Building Materials., Vol 22, No. 7, PP. 1368-1376.
- Mahrez, A, and Rehan, M. (2003)" Rheological evaluation of aging properties of crumb rubber-modified bitumen. Of the Eastern Asia Society for Transportation Studied". Retrieved from., Vol 5, PP. 820-833.
- Mahrez, Abdelaziz, Karim, M. R., and Katman, H. Y. bt. (2005), "Fatigue and Deformation Properties of Glass Fiber Reinforced Bituminous Mixes". the Eastern Asia Society for Transportation Studies., Vol 6, PP. 997-1007.
- Mashaan, N. S., Ali, A. H., Karim, M. R., and Abdelaziz, M. (2011) "Effect of crumb rubber concentration on the physical and rheological properties of rubberised bitumen binders". the Physical Sciences., Vol 6, No. 4, PP. 684-690.
- Mirabdolazimi, S. M., and Shafabakhsh, G. (2017) "Rutting depth prediction of hot mix asphalts modified with forta fiber using artificial neural networks and genetic programming technique". Construction and Building Materials., Vol 148, PP. 666-674.
- Oliveira, J. R. M., Silva, H. M. R. D., Abreu, L. P. F., and Fernandes, S. R. M. (2013) "Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures". Cleaner Production., Vol 41, PP. 15-22.
- Putman, B. J., Thompson, J. U., and Amirkhanian, S. N. (2005) "High temperature properties of crumb rubber modified binders". Proceeding of the Mairepav 4.
- Shen, J., Amirkhanian, S., Xiao, F., and Tang, B. (2009) "Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders". Construction and Building Materials., Vol 23, No. 1, PP. 304-310.
- Tanzadeh, J., Vafaeian, M., and Yusefzadeh-Fard, M. (2017) "Laboratory study on the performance of hybrid macro soil fiber reinforced mixture". Vol 134, PP. 50-55. Construction and Building. Retrieved from.
- Way, G. B., Kaloush, K., and Biligiri., K. P. (2012) "Asphalt-rubber standard practice guide–an overview. Proceedings of Asphalt Rubber". PP. 23–40.
- Yang, X., You, Z., Hasan, M. R. M., Diab, A., Shao, H., Chen, S., and Ge, D. (2017) "Environmental and mechanical performance of crumb rubber modified warm mix asphalt using Evotherm". Cleaner Production, Vol 159, PP. 346–358.
- Yu, H., Leng, Z., and Gao, Z. (2016), "Thermal analysis on the component interaction of asphalt binders modified with crumb rubber and warm mix additives". Construction and Building Materials., Vol 125, PP. 168–174.