- ذات اکرم، م.، خبیری، م.م. و میرابی مقدم، م.ح. (1396) "بررسی آزمایشگاهی و تحلیل آماری اثر آلایندهها بر مقاومت لغزندگی روسازی آسفالتی"، فصلنامه علمی-پژوهشی مهندسی حمل و نقل، دوره 8، شماره 4، ص. 589-602.
- شعبانی، ش. (1394) "ارزیابی خصوصیات سنگدانههای مورد استفاده در روسازی با استفاده از روش مقطع نازک و نقش آن در عملکرد لغزندگی رویههای راه"، پایاننامه دکترا، استاد راهنما: محمود احمدینژاد، تهران: دانشکده عمران، گروه حمل و نقل، دانشگاه علم و صنعت ایران.
- میرابی مقدم، م.ح. و اکبری، ع. (2015) "بررسی آزمایشگاهی تأثیر دما بر مقاومت لغزندگی انواع مخلوطهای آسفالتی"، فصلنامه علمی-پژوهشی مهندسی حمل و نقل، دوره 6، شماره 4، ص. 703-716.
- Afonso, M.L., Almeida, M. and Fael, C.S. (2019) "Characterization of the skid resistance and mean texture depth in a permeable asphalt pavement In IOP conference series", Materials Science and Engineering, Vol. 471, No. 2, pp. 2029-2039.
- Alhasan, A., Smadi, O., Bou-Saab, G., Hernandez, N. and Cochran, E. (2018) "Pavement friction modeling using texture measurements and pendulum skid tester", Transportation Research Record, Vol. 2672, No. 40, pp. 440-451.
- Chen, X.W. (2018) "Laboratory evaluation of an innovative and cost effective high-friction surface treatment", (Doctoral dissertation, Michigan State University), pp. 1-10.
- Clarke, J.D., Hallas, K., Lewis, R., Thorpe, S., Hunwin, G. and Carré, M.J. (2014) "Understanding the friction measured by standardized test methodologies used to assess shoe-surface slip risk", Journal of Testing and Evaluation, Vol. 43, No. 4, pp. 723-734.
- Friel, S. and Woodward, D. (2019) "High friction surfacing systems using blends of natural aggregate and calcined bauxite", Coatings, Vol. 9, No. 3, pp. 177-188.
- Heitzman, M., Turner, P. and Greer, M. (2015) "High friction surface treatment alternative aggregates study", NCAT Report, No. 15‐04, pp. 10-50.
- Karzan, S. and Razzaq, N.A. (2017) "Traffic accidents analysis on dry and wet road bends surfaces in greater manchester-UK", Kurdistan Journal of Applied Research, Vol. 2, No. 3, pp. 284-291.
- KDOT. (2015) "Special provision to the standard specification", Kensas Department of Transportation, 2015 edition, No. 07-PS0468, pp. 1-16.
- Li, S., Xiong, R., Yu, D., Zhao, G., Cong, P. and Jiang, Y. (2017) "Friction surface treatment selection: aggregate properties, surface characteristics, alternative treatments, and safety effects", No. FHWA/IN/JTRP-2017/09, pp. 1-10.
- Tsai, Y., Wu, Y.C. and Ai, C. (2018) "Identification of site characteristics for proactive high-friction surface treatment site selection using sensor-based, detailed, location-referenced curve characteristics data", Transportation Research Record, Vol. 2672, No. 38, pp. 1-13.
- WHO. (2015) "Global status report on road safety 2015", World Health Organization. Printed in Italy, pp. 1-257.
- Zahir, H. (2016) "Performance of local aggregate in high friction surface treatment", (Doctoral dissertation, Kansas State University), pp. 38-78.